I powered up an ASA 5520 and received the below message:
Default configuration file contains 1 entry.
Searching / for images to boot.
Error 28: Selected item cannot fit into memory
unable to boot an image
Someone thought that I should erase flash and tftpdnld from Rommon. I deleted disk0:
Next in Rommon, I tried doing the following commands...
ADDRESS=192.168.2.1 (ASA's address)
SERVER=192.168.2.2 (connected to my laptop for tftp via a cross-over cable)
GATEWAY=192.168.2.1 (have also tried leaving this blank and the laptop's IP)
PORT=GigabitEthernet0/0 (port cable is plugged into)
I usually will get that GigabitEthernet0/0 is UP
I then enter the tftpdnld command, and it's like the ASA can't see the connection between it and the laptop.
It can't even ping.
I know the TFTP works because I tried it with a different ASA while in the IOS and it worked fine.
What am I doing wrong?