Solved: Data MDT Convergence Issue

shivlu jain · ‎06-09-2009

I am facing a issue with mVPN data mdt convergence. Scenario is given below

CE1(Sender)-PE1--P---PE2---CE2(Receiver)

|

PE3

|

CE3 (Receiver)

SP core is using SSM and customer is using auto-rp. Confgiuration of VRF is given below

rd 65500:120

route-target export 65500:111

route-target import 65500:111

mdt default 239.232.3.8

mdt data 239.232.129.224 0.0.0.31 threshold 1

CE2 & CE3 is receiving the streams but at PE1 end when I see the mdt send it shows only one group 239.232.129.224. According to me the data mdt will create with each PE where the stream needs to be forwarded and a ip from data mdt pool will be used.

Harold Ritter · ‎06-10-2009

Shivlu,

This is correct behavior. There is not one data MDT group per receiving PE but rather one data MDT group per (s,g). So if you have one stream being sent to two PEs in this case, you only have one data MDT group.

Regards

Harold Ritter
Sr Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México

View solution in original post

Harold Ritter · ‎06-10-2009

Shivlu,

This is correct behavior. There is not one data MDT group per receiving PE but rather one data MDT group per (s,g). So if you have one stream being sent to two PEs in this case, you only have one data MDT group.

Regards

Harold Ritter
Sr Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México

shivlu jain · ‎06-10-2009

Hi Hriter

Thanks for your reply. It means data mdt will work w.r.t to the multicast groups not with the PE.

e.g. If customer is having 10 multicast group and SP is using "mdt data 239.232.129.224 0.0.0.31 threshold 1" which covers 32 ip addresses. In this case 239.232.129.224 - 239.232.129.233 data ,dt groups will be used.

regards

shivlu jain

Harold Ritter · ‎06-11-2009

Shivlu,

That is correct.

Regards

Harold Ritter
Sr Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México

Harold Ritter · ‎06-11-2009

Shivlu,

Just to add that if you had more than 32 streams going concurrently, data MDT group addresses would be reused.

Regards

Harold Ritter
Sr Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México

shivlu jain · ‎06-11-2009

hritter

really thanks for your quick support and making my doubts clear.

Goning to rate you:)

regards

shivlu jain