06-10-2009 09:34 AM - edited 03-04-2019 05:04 AM
Hi, can i make a port part of dual vlan, that is data and voice in cat 6500 and 4006 series switches? i dont know how to.
i can do it easily in IOS bases switches.
need help
Solved! Go to Solution.
06-10-2009 10:53 AM
If we are dealing with CATOS then you should be using the auxiliary vlan command:
set port auxiliaryvlan mod[/ports] {vlan | untagged | dot1p | none}
The auxiliary vlan here will be the voice vlan.
Hope it helps...
06-10-2009 10:53 AM
If we are dealing with CATOS then you should be using the auxiliary vlan command:
set port auxiliaryvlan mod[/ports] {vlan | untagged | dot1p | none}
The auxiliary vlan here will be the voice vlan.
Hope it helps...
06-17-2009 08:26 AM
yes it helped, thanx man :)
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: