yjdabear Thu, 06/11/2009 - 06:36

Assuming you meant the SNMP linkUpDown trap messages, yes, you can control that per interface via:


[no] snmp trap link-status



rtuttle Thu, 06/11/2009 - 10:00

by default CiscoWorks does not alert on up/down of access ports. Only trunks, uplinks and wan links.

In our parallel sytem HPOV it seemed to have an issue with the up/down links and the person for that system went in and did a no snmp trap link status on every interface. So now when trunks or uplinks go down. we dont know about it.

I say this only as a caution as to which interfaces you want "managed" in cw.


srimural Thu, 06/11/2009 - 20:43

Hi,

Yep. I got it yesterday... my intention is to avoid this ISDN VOICE interface which goes up n down for each voice call to be removed from sending traps for that...


Thanks for the input again..


have enabled both in the sense..


no snmp trap link-status

no logging event link-status


Regards,


Srinath M

+91 99809 30364

Actions

This Discussion