Cyberdata VOIP Loudspeaker Amplifier

Unanswered Question
Jun 11th, 2009
User Badges:
  • Silver, 250 points or more

UCM 7.1

Cyberdata VOIP Loudspeaker Amp


I have gotten this to register and work but what I am running into is the ability for this device to stay registered. I looked at the manufactures website that talks about this same issue but I am not sure what timer in the Service parameters that this is exactly referring to. Link makes mention of a re-registration time value but not sure what exactly of this parameter.


http://www.cyberdata.net/products/voip/digitalanalog/loudspkramp/index.html#Q19



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Nicholas Matthews Thu, 06/11/2009 - 10:19
User Badges:
  • Red, 2250 points or more

Can you be more specific about exactly how this is registering, protocols, devices, etc?



-nick

mattcalderon Thu, 06/11/2009 - 10:36
User Badges:
  • Silver, 250 points or more

Sure,


This the guide that I used for both sides.

http://tinyurl.com/nsgxt2


Essentially though, I added a third-party SIP device (basic) and then created a user and associated the user to SIP device.


On the cyberdata side, it was just pointing the device to UCM and putting the credentials in from the user that i created.


Seems pretty simple right?? It just wont stay registered. It does work when it is registered though.

Actions

This Discussion