06-12-2009 03:49 AM - edited 03-06-2019 06:13 AM
hi everyone! plz help me to upgrade the IOS of 6513 swich. Recent IOS version is 12.2(18)SXF7. I have two sup engines 720 series.
06-12-2009 11:27 AM
Hi
Hope the below link will help u.
Thanks
Mahmood
06-12-2009 08:45 PM
i have seen this document , actually i have to implement it on my core switch so plz tell me did u try this ? will this work fine ? there is one step in that delete the current file . after that will this work or not ?
06-12-2009 06:25 PM
Standard IOS or Modular IOS?
06-12-2009 08:35 PM
actually not much sure . my requirement is that i have to implement some services like SLA which are not running on this IOS. I have to upgrade it on both 6513 and 7613. some times i m thinking abt SR but not sure . what u say abt it ?
06-12-2009 11:45 PM
I am sure no one here will recommend that you upgrade to a specific IOS unless you really need to. Even more, no one will also recommend an upgrade without testing the firmware in a test environment.
I will not be able to answer your question but I will urge you to take it upon yourself to test the firmware and/or read the release notes for any potential pitfalls you might encounter.
You can also do some research through Cisco's Software Advisory and Bug Traq.
06-13-2009 12:10 AM
thanx dear. this is main concern thats by i m not upgarding my IOS. so i m bit afraid that while upgrading there may b some problems. i m afraid of downtime .
06-13-2009 02:34 PM
Do you have two Sup720 in a chassis?
06-13-2009 10:24 PM
yes . we have two sup engines . i have done redundancy between them
06-14-2009 02:19 AM
Copy the IOS to the master and secondary blade. Reboot the redundant blade and then reboot the primary blade.
06-14-2009 02:25 AM
i got it . means u r saying that i have to simply copy from tftp to file as we do with other devices . shud i need any other commands.
06-14-2009 02:38 AM
i got it . means u r saying that i have to simply copy from tftp to file as we do with other devices . shud i need any other commands.
06-14-2009 02:47 PM
Catalyst 6000/6500 Series Switches with Redundant Supervisor Engines Software Image Upgrade Configuration Example
Hope this helps.
06-14-2009 08:52 PM
i m unable to access this page.can u plz send me this page after downloading it .
thanx,
tarn
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: