AIR-LAP1131AG won't complete connectivity

Unanswered Question
Jun 12th, 2009

Hi

We have 3 new AIR-LAP1131AG access points connecting to 4400 controller with software version 4.2.205.0. The access points connect to the controller and start downloading their software. After a few minutes the access points reboots and starts over. Below is information from the trap logs.


Fri Jun 12 10:48:46 2009 AP Associated. Base Radio MAC: 00:14:1b:b7:90:e0

1 Fri Jun 12 10:48:21 2009 AP Disassociated. Base Radio MAC:00:14:1b:b7:90:e0

2 Fri Jun 12 10:48:21 2009 AP's Interface:1(802.11a) Operation State Down: Base Radio MAC:00:14:1b:b7:90:e0 Cause=Heartbeat Timeout

3 Fri Jun 12 10:48:21 2009 AP's Interface:0(802.11b) Operation State Down: Base Radio MAC:00:14:1b:b7:90:e0 Cause=Heartbeat Timeout

Does anyone have an idea what could be causing this problem.




  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
cchitwood1 Thu, 07/09/2009 - 06:14

We recently ran into this. If you are using LAG on your WLC; make sure you have a port channel configured on your connecting switch. An easy way to see what is going on is to telnet into the WLC and enable debug "debug lwapp events enable" With this we saw an error message "packet 3 received, packet 4 expected"

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode