Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
3918
Views
0
Helpful
2
Replies

Call from Analogue phone to SIP phone

kurmai
Cisco Employee
Cisco Employee

‎06-12-2009 05:08 PM - edited ‎03-21-2019 01:12 AM

Hi all,

I have a UC520 and a 2691. The UC520 has a SIP phone (7940) registered, and the 2691 has an analogue phone connected to its FXS port. The two routers are connected through a crossover ethernet link. Since the SIP phone is registered, the UC520 has a dial peer for it. What should I do to let the analogue phone and the SIP phone call each other? Thanks!

Labels:
0 Helpful
2 Replies 2

Steven Smith
Level 7
Level 7

‎06-15-2009 02:37 PM

You will likely need to add a SIP dial peer for communications to and from the analogue phone on the 2691.  You will need dial peers on the 2691 also to accept and place calls to the UC500.

0 Helpful

kurmai
Cisco Employee
Cisco Employee
In response to Steven Smith

‎06-15-2009 02:40 PM

Thanks Steven. I had some issues with them calling each other, but it ended up to be codec.

0 Helpful
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents