Route calls on Router based on Calling Number?

ShailendraK · ‎06-13-2009

Hi Gurus,

Is there any method yet to route outgoing calls based on calling number on a gateway apart from blocking incoming calls based on the calling number?

Thanks

Shad

paolo bevilacqua · ‎06-13-2009

Yes, see:

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801c0a88.shtml

Now tell me that you want to use your new freind trunk-groups for that ?

Marwan ALshawi · ‎06-16-2009

you could also use answer address on your inbound voip dial-peer and translate the matched number to whatever you want then the translated numr will match a pots dial-peer

paolo bevilacqua · ‎06-16-2009

That is exactly what the document linked above explains in detail.

ShailendraK · ‎06-18-2009

Hi guys,

Thanks for replying. It worked for me.

Paolo, I am still not able to get over the incredible feeling of the new friend pri-group. So I will not answer that question yet. Maybe later sometime. Let me enjoy the moment. ;)

Thanks,

Shad