06-13-2009 11:02 PM
Hi all,
Is WAE(674)inline mode fine for data center or should I go for WCCP?
Any idea about throuput of inline adaptor?
Thanks
Solved! Go to Solution.
06-16-2009 05:22 AM
Hi Nomair,
I usually start with WCCP in the DC due to the fact that you are limited to intercepting on 2 links with the inline card currently and most DC scenarios have requirements of using more then 2 links (or routers).
Thanks,
Dan
06-16-2009 05:22 AM
Hi Nomair,
I usually start with WCCP in the DC due to the fact that you are limited to intercepting on 2 links with the inline card currently and most DC scenarios have requirements of using more then 2 links (or routers).
Thanks,
Dan
06-17-2009 07:28 AM
Ok thanks I will use wccp.
One more thing, can I use 674 as WAE appliance and 512 as CM who will manage 674 appliance or I have to use same appliance for CM as well?
Regards
06-18-2009 05:36 PM
CM size is based on how many WAEs it will be managing. A 512-2 GB WAE can manage around 1000 WAEs, a 1 GB 512 roughly half as much.
Good luck!
Dan
06-20-2009 10:27 PM
Thanks dear,
I already have ordered additional 1GB memory.
thanks for your feedback.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: