EZVPN trouble on PIX/ASA

ybtheneonet · ‎06-14-2009

Hello all!

I've been facing this problem when i try to work a remote-vpn lab on GNS .

It's a simple setup

INSIDE ROUTER : 2691-adventerprisek9_sna-mz.124-13b

PIX : v8.03

The cloud represents my PC as you all know.

I've set up everything to the best of my ability and according to cisco documentation, but everytime i try to do a ezvpn connection to the firewall from my PC, the VPN client doesnt connect to the PIX. I tried turning on the debug in the PIX and i saw the output ( Seen in the attached screenshot.jpg ).

Please let me know what the problem is?

The settings on the VPN-Client are

Group : VPN_GROUP

password : cisco

host : 10.1.1.12 ( PIX's outside interface ).

Anyhelp would be appreciated!

Cheers!

Tacack

ybtheneonet · ‎06-14-2009

Here's the PIX configuration attached.

ybtheneonet · ‎06-14-2009

I added the default-group-policy VPN_GROUP under the general-attributes of the tunnel configuration, but still not working!

paul · ‎06-14-2009

Is that the group name that you specified in your client as "Group Authentication Name" well? Also, does the password on the client, match the pre-shared key set on the group? I really don't think it is getting to the point to match the key though. Also, you may want to do a "debug crypto isakmp 128" to get more information.

paul · ‎06-14-2009

Actually the group name on your client would be VPN_TUNNEL