cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
45830
Views
15
Helpful
11
Replies

Set clock time zone

pweinhold
Level 1
Level 1

Is there a way to set the time zone on routers/switches? We're in the Eastern time zone, but some of my switches show UTC (Greenwich Mean Time/Zulu time). I'd like all of them to show the local time, just to make it easier to read.

11 Replies 11

Patrick,

You can.

Router(config)# clock timezone <(-23) - (23) ;Hours offset from UTC>

F.e Router(config)# clock timezone CST -6

HTH,

Toshi

Thanks very much for the help.

Pat

MYANMAR

Hello,

 

Myanmar is:

 

UTC +6:30

Dallas Texas ?

Dallas Tx would be CST -6

HTH

Rick

Thanks a lot

How will this work with CAT which is +2 GMT? 

Got it

Clock timezone CAT 9 11

Edison Ortiz
Hall of Fame
Hall of Fame

Toshi has provided the syntax the modify the timezone in the router (btw, Eastern time zone in the US is EST -5).

If you want to see this time being stamped on the log, you need the 'service timestamps' command which can be applied to log messages as well as debug messages

http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_r1.html#wp1030116

HTH,

__

Edison.

syedajim1123617
Level 1
Level 1

Hi guys idk why its say APIPA being used. I've try almost everything i knew but still the same. The server has been set to static.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: