voice port not appear in running-config

Unanswered Question
Jun 15th, 2009
User Badges:

Hi all,

I have problem with my C3660.

I want to configure this router as voice gateway.

But unfortunately, my voice port doesn't appear when I type "sh run".

But it is detected when I issue command "sh ver" and "sh diag".

My voice modul using 4 PORT Voice PM for MARs Port adapter (2FXS and 2FXO).


Thanks for any help.

ari

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Mon, 06/15/2009 - 23:29
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Are there the DSP on the NM ? Check show diag.

arianto.wibowo Mon, 06/15/2009 - 23:56
User Badges:

I'm using this module

Slot 3:

High Density Voice Port adapter

Port adapter is analyzed

Port adapter insertion time unknown

EEPROM contents at hardware discovery:

Hardware Revision : 1.1

Top Assy. Part Number : 800-XXXXX-01

Board Revision : G0

Deviation Number : 0-0

Fab Version : 02

PCB Serial Number : JABXXXXXXXX

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF 40 00 CC 41 01 01 C0 46 03 20 00 0D EF 01

0x10: 42 47 30 80 00 00 00 00 02 02 C1 8B 4A 41 42 30

0x20: 35 34 36 30 43 4E 42 03 00 81 00 00 00 00 04 00

0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

WIC Slot 0:

T1 (1 Port) Multi-Flex Trunk WAN Daughter Card

Hardware revision 1.0 Board revision A0

Serial number 27XXXXXX Part number 800-03568-03

Test history 0x0 RMA number 00-00-00

Connector type PCI

EEPROM format version 1

EEPROM contents (hex):

0x20: 01 20 01 00 01 9F DA 68 50 0D F0 03 00 00 00 00

0x30: 50 00 00 00 01 11 08 00 FF FF FF FF FF FF FF FF


HDV firmware: Compiled Mon 26-Nov-01 16:24 by miriyala

HDV memory size 524280 heap free 202857

paolo bevilacqua Tue, 06/16/2009 - 00:02
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Seems like there are no DSP on it.

For sure no FXS/FXO ports.

CHRIS CHARLEBOIS Tue, 06/16/2009 - 10:52
User Badges:
  • Silver, 250 points or more

What IOS feature set are you using? Are they feature sets or versions different between the top routers?

arianto.wibowo Tue, 06/16/2009 - 17:05
User Badges:

Using c3660-ik8s-mz-122-6c-M1.bin for both

Seems like the problem is on NM voice module (2V).

What do you think ?

Actions

This Discussion