Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
474
Views
0
Helpful
3
Replies

ISR to CUCM (with sip-digest)

torsten.brink
Level 1
Level 1

‎06-16-2009 11:22 AM - edited ‎03-15-2019 06:33 PM

Hi Forum,

I have the requirement to connect a CUCM to an ISR Router (e.g. 28xx) via a SIP Trunk.

Of course, this shouldn't be a problem.

BUT. I need to authenticate the gateway to the cucm via SIP-digest (please don't ask why :-).

On CCO I found out, that a authentification on a CUCM sip-trunk should be possible (see on: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/security/6_1_1/secugd/secrealm.html#wp1070945)

I was wondering what has to be done on the ISR gateway. Is this possible and when yes what has to be configured??

Best regards.

Torsten.

Labels:
0 Helpful
3 Replies 3

parshah
Cisco Employee
Cisco Employee

‎06-16-2009 12:09 PM

Torsten,

Please refer to the following link in how to configure digest auth for SIP in IOS.

http://www.cisco.com/en/US/docs/ios/voice/sip/configuration/guide/sip_cg-aaa_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1836324

Thanks,

0 Helpful

torsten.brink
Level 1
Level 1
In response to parshah

‎06-22-2009 11:27 PM

Hi Parshah,

sorry for my late reply. Thanks for your link it helped me a lot.

Cheers

Torsten.

0 Helpful

parshah
Cisco Employee
Cisco Employee
In response to torsten.brink

‎06-23-2009 09:20 AM

Torsten,

Glad to know it helped you out. If the link helped answer your questions kindly update the thread to denote that.

Thanks,

0 Helpful
Customers Also Viewed These Support Documents