×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

3845 specific MIB/OID per T1 controller

Unanswered Question
Jun 16th, 2009
User Badges:

Hello,


I have a Customer who is looking for a very specific SNMP MIB/OID.


System image file is "flash:c3845-ipvoicek9-mz.124-16.bin"


Would like OID which shows how many DS0s are in use on one particular controller.


Have tried these already and not specific per T1


CISCO-VOICE-DIAL-CONTROL-MIB:


"cvVoIPCallActiveTable"

"1.3.6.1.4.1.9.9.63.1.3.2"


Object cvVoIPCallActiveTable

OID 1.3.6.1.4.1.9.9.63.1.3.2


Object cvCallActiveDS0s

OID 1.3.6.1.4.1.9.9.63.1.3.3



DIAL-CONTROL-MIB:


"callActiveTable"

"1.3.6.1.2.1.10.21.1.3.1"


DIAL-CONTROL-MIB: "callActiveCallState"

"1.3.6.1.2.1.10.21.1.3.1.1.9"


Object callActiveCallState

OID 1.3.6.1.2.1.10.21.1.3.1.1.9


Any ideas would be appreciated.


Thank You.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Joe Clarke Tue, 06/16/2009 - 12:37
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

The ideal object for this is cpmDS1ActiveDS0s from the CISCO-POP-MGMT-MIB. However, due to design conflicts between the MIB, and the ISR platforms, this object may not provide accurate results if the T1s have a three tuple index.

Jim White Tue, 06/16/2009 - 12:43
User Badges:

Thanks for the update.


Actually they are using that MIB and are having trouble getting good results. They do have the three tuple index as well.


Do you know of any other MIB I could have them try?

Joe Clarke Tue, 06/16/2009 - 12:52
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

I do not believe there is another object which will give you what you want. However, if you can find a CLI command that gives the information, you may consider deploying the EEM custom MIB policy which can extract data from a CLI command, and create a custom MIB object using the EXPRESSION-MIB.


That policy can be downloaded from http://forums.cisco.com/eforum/servlet/EEM?page=eem&fn=script&scriptId=1743 .

Actions

This Discussion