ATA UNREGISTER_ABNORMAL

Unanswered Question
Jun 16th, 2009

I have an ATA 186 I am trying to register to a CME through a DMVPN. When I put the ATA on the local network with the CME, it registers without issue. If I put the ATA at the remote location, it unregisters abnormally.

3825 IOS 12.4(25a) SPESERVICESK9-M.

CME 3.3

Debug scrolls the following:

Jun 16 19:30:33.368: %IPPHONE-6-REG_ALARM: Name=ATA001906012507 Load=ATA030204SCCP090202A.zup Last=Initialized

Jun 16 19:30:33.368: %IPPHONE-6-REG_ALARM: Name=ATA190601250701 Load=ATA030204SCCP090202A.zup Last=Initialized

Jun 16 19:30:33.368: %IPPHONE-6-REGISTER: ephone-2:ATA001906012507 IP:10.65.65.21 Socket:3 DeviceType:Phone has registered.

Jun 16 19:30:33.368: %IPPHONE-6-REGISTER: ephone-3:ATA190601250701 IP:10.65.65.21 Socket:2 DeviceType:Phone has registered.

Jun 16 19:30:34.884:

socket [3] send ERROR 11 msg=0x109

Sleep 250 msec for ephone-(2) on socket [3]Skinny Socket [3] retry failure errno=11

Jun 16 19:30:35.136: %IPPHONE-6-UNREGISTER_ABNORMAL: ephone-2:ATA001906012507 IP:10.65.65.21 Socket:3 DeviceType:Phone has unregistered abnormally.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
gogasca Wed, 06/17/2009 - 23:29

Make sure ATA is running latest load.

check with VPN guys....u have already isolate it to turn on inspection for sccp.

Actions

This Discussion