ISDN connection fail

Unanswered Question
Jun 16th, 2009

Hi experts, I have an ISDN connection and tried to activate it by dial test, but the test is fail and found the following message, can anyone help?

Jun 12 08:35:09: BR1/0 DDR: Attempting to dial 0112223334445

Jun 12 08:35:09: ISDN BR1/0 Q921: User TX -> INFO sapi=0 tei=64, ns=4 nr=8

Jun 12 08:35:09: ISDN BR1/0 Q931: SETUP pd = 8 callref = 0x72

Bearer Capability i = 0x8890

Standard = CCITT

Transer Capability = Unrestricted Digital

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0x83

Keypad Facility i = '0112223334445'

Jun 12 08:35:09: ISDN BR1/0 Q921: User RX <- RR sapi=0 tei=64 nr=5

Jun 12 08:35:10: ISDN BR1/0 Q921: User RX <- INFO sapi=0 tei=64, ns=8 nr=5

Jun 12 08:35:10: ISDN BR1/0 Q931: RELEASE_COMP pd = 8 callref = 0xF2

Cause i = 0x82B2 - Requested facility not subscribed

Jun 12 08:35:10: ISDN BR1/0 Q921: User TX -> RR sapi=0 tei=64 nr=9

Jun 12 08:35:10: ISDN Error: Invalid DSL (13) **ERROR**: CCBNI1_CallOriginate: Setup was rejected, cause = 50

Jun 12 08:35:10: ISDN BR1/0 **ERROR**: host_disconnect_ack: Unfound B-channel on Disconnect_Ack call id 0x8529

Jun 12 08:35:11: ISDN BR1/0 Q921: User RX <- IDCKRQ ri=0 ai=127

Jun 12 08:35:11: ISDN BR1/0 Q921: User TX -> IDCKRP ri=21293 ai=64

Jun 12 08:35:12: ISDN BR1/0 Q921: User RX <- IDCKRQ ri=0 ai=127

Jun 12 08:35:12: ISDN BR1/0 Q921: User TX -> IDCKRP ri=34302 ai=64

Jun 12 08:35:39: BRI1/0: wait for isdn carrier timeout, call id=0x8529

Jun 12 08:35:39: ISDN BR1/0 **ERROR**: CCBRI_Go: NO CCB Src->HOST call id 0x8529, event 0x5 ces 1

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
hfma_hk09 Wed, 06/17/2009 - 17:03

You are correct, the call test is made from the switch which is located in US.

hfma_hk09 Thu, 06/18/2009 - 17:30

My configuration is using "basic-ni" right now, do you think the correct setting should be "basic-5ess"?

Thanks!

Actions

This Discussion