06-18-2009 12:51 AM - edited 03-15-2019 06:35 PM
I've a CCME with 2 bri, ISDN line is point to multipoint, what is command for solved my problem ?
Thanks all
Dario
Solved! Go to Solution.
06-18-2009 04:33 AM
12.4(4)XJ4 is rock stable, but not very recent.
Else take a pick from recent 12.4 T
06-18-2009 12:59 AM
That is the default configuration and no command is needed.
Only, recommend you use "isdn tei-negotiation preserve".
06-18-2009 02:57 AM
I've use "isdn tei-negotiation preserve" but this is isdn error when try to call.
003230: *Jun 18 12:55:47.731 Berlin: ISDN BR0/0/0 SERROR: L2_Go: at bailout DLCB is NULL
L2: sapi 0 tei 127 ces 0 ev 0x250
003231: *Jun 18 12:55:51.727 Berlin: ISDN BR0/0/0 SERROR: L2_Go: at bailout DLCB is NULL
L2: sapi 0 tei 127 ces 0 ev 0x250
003232: *Jun 18 12:55:51.727 Berlin: ISDN BR0/0/0 **ERROR**: CCBRI_Go: NO CCB Src->L3 call id 0x8016, event 0x95 ces 0
003233: *Jun 18 12:55:51.727 Berlin: ISDN **ERROR**: Module-CCBRI Function-_Go Error-Event received for an unrecognized call. Data- 95, 0
Thanks
06-18-2009 03:07 AM
Likely buggy IOS, upgrade to something else.
06-18-2009 04:24 AM
Thanks,what IOS do you recommend?
06-18-2009 04:33 AM
12.4(4)XJ4 is rock stable, but not very recent.
Else take a pick from recent 12.4 T
06-24-2009 05:08 AM
Now I have install c2801-advipservicesk9-mz.124-19.bin when try to call error is :
"000365: .Jun 24 14:06:53.899: ISDN BR0/0/0 **ERROR**: CC_CHAN_GetIdleChanbri: All channels busy"
06-24-2009 11:23 AM
Try what I've indicated above that works for sure. Then you will have time to upgrade.
07-07-2009 08:40 AM
Now IOS is 12,4 (4) XJ4 but not call in or out.
Debug Isdn Error:
001801: *Jul 7 17:35:24.971: ISDN BR0/1/0 SERROR: L2_Go: at bailout DLCB is NULL
L2: sapi 63 tei 127 ces 0 ev 0x650
001802: *Jul 7 17:35:25.007: ISDN BR0/1/0 SERROR: L2_Go: at bailout DLCB is NULL
L2: sapi 63 tei 127 ces 0 ev 0x3
001803: *Jul 7 17:35:26.971: ISDN BR0/1/0 SERROR: L2_Go: at bailout DLCB is NULL
L2: sapi 63 tei 127 ces 0 ev 0x650
001804: *Jul 7 17:35:27.011: ISDN BR0/1/0 SERROR: L2_Go: at bailout DLCB is NULL
L2: sapi 63 tei 127 ces 0 ev 0x3
Have you an idea ?
Thanks
07-07-2009 09:36 AM
bad, does the line work with an ISDN telephone ?
07-09-2009 11:21 PM
yes work fine, probably i've bad configuration ?
07-10-2009 03:45 AM
Post it here.
07-10-2009 05:10 AM
!
version 12.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
service sequence-numbers
!
hostname CCME
!
boot-start-marker
boot system flash c2801-spservicesk9-mz.124-11.XJ4.bin
boot-end-marker
!
no logging buffered
enable secret 5 $1$h43y$TxrNu.aYqXMARAaO9Ue1q/
!
no aaa new-model
clock timezone Berlin 1
clock summer-time Berlin date Mar 30 2003 2:00 Oct 26 2003 3:00
network-clock-participate wic 0
network-clock-participate wic 1
ip cef
!
!
no ip dhcp use vrf connected
ip dhcp excluded-address 10.0.1.1 10.0.1.79
ip dhcp excluded-address 10.0.1.86 10.0.1.254
!
ip dhcp pool Pool
import all
network 10.0.1.0 255.255.255.0
dns-server 10.0.1.9 10.0.1.19
option 150 ip 10.0.1.4
!
!
ip telnet source-interface FastEthernet0/0
no ip ftp passive
ip name-server 10.0.1.9
ip name-server 10.0.1.19
ip ssh time-out 60
ip ssh authentication-retries 2
multilink bundle-name authenticated
!
isdn switch-type basic-net3
!
voice-card 0
!
!
!
!
!
!
!
!
!
!
!
!
!
!
voice translation-rule 1
!
!
voice translation-profile CALLER_ID_TRANSLATION_PROFILE
translate calling 1
!
!
!
!
!
username admin password 7 08374342080B00
!
!
!
!
!
interface FastEthernet0/0
ip address 10.0.1.4 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface BRI0/0/0
description Voce
no ip address
isdn switch-type basic-net3
isdn tei-negotiation preserve
isdn incoming-voice voice
!
interface BRI0/0/1
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
!
interface BRI0/1/0
description GSM
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
!
interface BRI0/1/1
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
!
ip route 0.0.0.0 0.0.0.0 10.0.1.253
!
!
ip http server
ip http secure-server
!
!
!
!
control-plane
!
!
!
voice-port 0/0/0
compand-type a-law
description Voce
!
voice-port 0/0/1
!
voice-port 0/1/0
compand-type a-law
description GSM
!
voice-port 0/1/1
!
!
!
!
dial-peer cor custom
!
!
!
dial-peer voice 1 pots
description Dial Plan
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
destination-pattern 0T
port 0/0/0
prefix 0
!
dial-peer voice 2 pots
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
destination-pattern 3T
port 0/1/0
prefix 3
!
!
!
telephony-service
max-ephones 25
max-dn 25
ip source-address 10.0.1.4 port 2000
time-zone 23
time-format 24
date-format dd-mm-yy
max-conferences 4 gain -6
web admin system name admin secret 5 $1$CP/9$Cvy85UASAsPl6CpjIwNNI1
transfer-system full-consult
create cnf-files version-stamp 7960 Jun 24 2009 14:34:43
!
!
ephone-dn 1 dual-line
number 930
label Dario
name Dario Pirovano
!
!
ephone 1
username "dpirovano"
mac-address 0023.331A.6644
type 7960
button 1f1
!
!
!
line con 0
line aux 0
line vty 0 4
privilege level 15
password 7 07192E404F1B1C
login local
transport input telnet ssh
!
scheduler allocate 20000 1000
ntp update-calendar
ntp server 10.0.1.9 source FastEthernet0/0 prefer
ntp server 172.22.1.107 source FastEthernet0/0
end
07-10-2009 05:18 AM
Config is correct. You only would need
network-clock-select 1 bri 0/0/0
but that probably will not change anything.
I don't know what to think, sorry.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: