show platform port-asic stat drop on non-master switch

Answered Question
Jun 18th, 2009

I have a 2 switch, 3750 stack. Switch 1 is the master. I have QOS enabled. When I enter the following command:


show platform port-asic stats drop fastEthernet 1/0/1


it works, but if I enter the command


show platform port-asic stats drop fastEthernet 2/0/1


I receive the following error:


%Command Rejected: interface 'FastEthernet2/0/1' is not local port


How do I look at port drops for a non-maser switch in a stack?


Correct Answer by andrew.butterworth about 7 years 8 months ago

You need to prefix the command with 'remote command x' where 'x' is the stack member. For example:


remote command 2 show platform port-asic stats drop fastethernet 2/0/1


In the latest 12.2(50)SE IOS the drop and enqueue stats from these commands are included in the 'show mls qos interface statistics' command.


HTH


Andy

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
andrew.butterworth Thu, 06/18/2009 - 07:52

You need to prefix the command with 'remote command x' where 'x' is the stack member. For example:


remote command 2 show platform port-asic stats drop fastethernet 2/0/1


In the latest 12.2(50)SE IOS the drop and enqueue stats from these commands are included in the 'show mls qos interface statistics' command.


HTH


Andy

Actions

This Discussion