how can i inject the vrf route into globe routing table?

thoughtjj · ‎06-18-2009

and if inject successful,which is the attribute of this vrf route in the globe routing table

thanks!

Laurent Aubert · ‎06-18-2009

Hi,

There is no dynamic way to leak vrf traffic into the GRT. you need to use static routes.

One for each way of traffic:

http://www.cisco.com/en/US/tech/tk436/tk832/technologies_configuration_example09186a0080231a3e.shtml

HTH

Laurent.

jcozzupoli · ‎07-03-2009

Hi,

I believe by adding the "global" keyword on theh at end of a static route that route will be leaked into the grt.

eg,

ip route vrf TEST_VRF x.x.x.x x.x.x.x y.y.y.y globsl

can you give more details as to why you want to do this?

Are you trying to leak routes from vrfs into the GRT which then is advertised to an ISP MPLS VPN network?

HTH

Joe.

jcozzupoli · ‎07-06-2009

have we solved your issue?

thoughtjj · ‎07-13-2009

i just receive the mail for your reply

thanks

thoughtjj · ‎07-13-2009

HI,

ip route vrf TEST_VRF x.x.x.x x.x.x.x y.y.y.y globsl

this command is only for the traffic which want to internet from vrf

but how handle with back traffic from internet on the PE,so i ask when this traffic arrive at the PE,it will auto be into vrf ,or must be do some command

thanks!