Gregory Camp Thu, 06/18/2009 - 14:23
User Badges:
  • Cisco Employee,

clear counters FastEthernet0/1 (or any other interface)

p.diaz Thu, 06/18/2009 - 14:40
User Badges:

hi Greg.


but that command doesnt clear the drops stadistics? tks

Gregory Camp Fri, 06/19/2009 - 09:23
User Badges:
  • Cisco Employee,

It should, what IOS are you running? Send me the output of sh policy-map int before and after clearing the counters.

joshua.wilson Fri, 06/26/2009 - 13:32
User Badges:

You could bounced the qos policy config...take it out and put it back in.

pierre-marc.lize Thu, 08/05/2010 - 09:39
User Badges:

Hi,

Ran accross this too,

Routeur wouldn't clear the policy-map counters (sh policy-map int xx) when clearing the specific interface...


Try clearing counters for all interfaces, worked for me..

ie:


clear counters

!## Make sure you hit enter to confirm at this prompt : Clear "show interface" counters on all interfaces [confirm]


Good Luck

chad.kibler Fri, 12/16/2011 - 07:48
User Badges:

Hi,


On my Cisco 2821 I used the following to clear the Service Policy counters on the Multilink interface.


clear counters mu1

or

clear counters multilink 1


Hopes this helps.


Chad

redray_76 Fri, 01/13/2017 - 12:38
User Badges:

clear qos counters int XXXXBLA.BLA.BLA (as an example)

Actions

This Discussion