i'm about to add several new controlers to my network and would like to use the Auto provisioning feature to help out.

the only problem i have is i havn't got involved in setting up the DHCP on a the network that is managed by our server team so i need to be able to tell them which opttion i need to us to point a new controller to the TFTP server on the WCS to get its configuration.

a quick guide to the setup is, the controllers are on 1 subnet, the wcs is one server on another subnet and the DHCP is on a second server. the router sitting in the middle of all this has the ip helper address set to point to the dhcp server and the controllers are picking up an ip address but not their config.

any ideas guessing as i said it's a DHCP option need setting.

Many Thanks,

Adam