I can not push the configuration to the controllers

Unanswered Question
Jun 19th, 2009

Involved hardware / software:

2x Cisco 6509E in VSS-1440 configuration

6509E running software version 12.2(33)SXI

2x WS-SVC-WISM-1-K9 WiSM module (1 per 6509)

WiSM running software version

1x WCS version

This is according to Cisco the WCS version to use with the WiSM software version - it was released for this version

Configuration that makes problems:

• First: I configure an ACL on the WCS - this is correctly pushed to the Controller configuration

• Second: I set the configured ACL as “Preauthentication ACL” for the web authentication

• This setting is NOT pushed to the controllers - I have to configure it via the CLI every time I apply the WLAN settings.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
mchin345 Thu, 06/25/2009 - 06:32

Delete the controllers having the issue From WCS and re-added them in. then try to push the configuration.

Leo Laohoo Thu, 06/25/2009 - 15:33

WiSM running software version and WCS version

Shouldn't the WCS be of the higher version?


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode