06-19-2009 08:08 AM
I have a cisco 6708 10G blade and a Sun server with a 10G LC connection interface. Im wishing to connect these two devices via 10g.
What type of LC GBIC is required for the Sun server side?
Solved! Go to Solution.
06-19-2009 08:19 AM
It all depends on the distance between the two devices.
Choose an optics module for the Sun server that matches the reach of the optics module in the 6708.
06-19-2009 08:19 AM
It all depends on the distance between the two devices.
Choose an optics module for the Sun server that matches the reach of the optics module in the 6708.
06-19-2009 08:39 AM
The two devices are basically side by side. I was just wondering if there was a recommendation.
But yes, I see now. I have X2-10GB-LX4 (1310 nm), and the reach on the sun side is 850nm which does not match.
Thank you.
06-19-2009 09:08 AM
The X2-10GB-SR optics module should save you a few dollars.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide