Unity integration with CUCM6

Answered Question
Jun 20th, 2009

hi there!

i have installed CUCM v6 and Cisco Unity from the same disk on VMware for testing purposes. how can i integrate them? do i need Unity Telephony Integration Manager (Utim). Where should i get that tool?

thanks in advance..

I have this problem too.
0 votes
Correct Answer by James Hawkins about 7 years 5 months ago

If you have installed the product from the same disk as CUCM 6.1 I presume that you are talking about Unity Connection 2.x rather than Windows based Unity.

The relevant guide for integrating CUCM using SCCP can be found at the link below.

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/2x/integration/cucme_sccp/guide/cucintcucmesccp.html

Please rate if helpful.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
James Hawkins Sun, 06/21/2009 - 11:52

If you have installed the product from the same disk as CUCM 6.1 I presume that you are talking about Unity Connection 2.x rather than Windows based Unity.

The relevant guide for integrating CUCM using SCCP can be found at the link below.

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/2x/integration/cucme_sccp/guide/cucintcucmesccp.html

Please rate if helpful.

Actions

This Discussion