Solved: Unity integration with CUCM6

nafrasiyabov · ‎06-20-2009

hi there!

i have installed CUCM v6 and Cisco Unity from the same disk on VMware for testing purposes. how can i integrate them? do i need Unity Telephony Integration Manager (Utim). Where should i get that tool?

thanks in advance..

James Hawkins · ‎06-21-2009

If you have installed the product from the same disk as CUCM 6.1 I presume that you are talking about Unity Connection 2.x rather than Windows based Unity.

The relevant guide for integrating CUCM using SCCP can be found at the link below.

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/2x/integration/cucme_sccp/guide/cucintcucmesccp.html

Please rate if helpful.

View solution in original post

Jaime Valencia · ‎06-20-2009

Of course you need the UTIM

To Add a UTIM Cluster to a Cisco Unified CM Integration

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/401/integration/guide/cu4xintskinnycucm6x.html#wp1842814

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

nafrasiyabov · ‎06-21-2009

where can i get UTIM ?

thanks in advance

James Hawkins · ‎06-21-2009

If you have installed the product from the same disk as CUCM 6.1 I presume that you are talking about Unity Connection 2.x rather than Windows based Unity.

The relevant guide for integrating CUCM using SCCP can be found at the link below.

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/2x/integration/cucme_sccp/guide/cucintcucmesccp.html

Please rate if helpful.

nafrasiyabov · ‎06-22-2009

thank you very much!!!