Hi,
Can you review the config and help.
Layer2_switch cannot ping any other subnet except management_Vlan subnet
Core_switch is defined as VTP Server and other switches as client
I can see all vlan propogated on other switches but cannot ping other vlans.
I have 5 vlans created on Core_switch
Vlan 5 - Server_farm
Vlan 6 - User_farm
Vlan 7 - Accounting_users
Vlan 8 - Management_Vlan
vlan 9 - Visitors_vlan
Vlan 5
ip address 192.168.1.0 255.255.255.0
Vlan 6
ip address 192.168.2.0 255.255.255.0
Vlan 7
ip address 192.168.3.0 255.255.255.0
Vlan 8
ip address 192.168.100.0 255.255.255.0
Vlan 9
ip address 192.168.4.0 255.255.255.0
I have 3 layer2 Switches and all are connected on fiber port
interface g0/1
switchport trunk encap dot1q
switchport mode trunk
Router ospf 5
network 192.168.1.0 0.0.0.255
network 192.168.2.0 0.0.0.255
network 192.168.3.0 0.0.0.255
network 192.168.4.0 0.0.0.255
network 192.168.100.0 0.0.0.255
on Layer2_Switch#1
interface vlan 8
ip address 192.168.100.1 255.255.255.0
Other requirements are allowing visitor_Vlan to access only one specific host. Visitor_Vlan should not be reached by other vlans and vice-versa