06-22-2009 05:32 AM - edited 03-15-2019 06:39 PM
Ive also got an issue where neither ad hoc nor meet-me conferencing is not working. I have CUCM 6.1.3, and I have the software setup, and devices, device pool, etc all in the same partition. I do not have conferencing resources setup on the gateway, which all should be using g711 internally. I know this may be a bit vague, but has anyone see this as well? By the way, this is BE.
06-22-2009 05:58 AM
Indeed this is vague, do you know exactly what happens??? busy, error on phone, etc?
With only that info i would suggest to try restarting IPVMS
HTH
java
if this helps, please rate
06-22-2009 06:11 AM
Well, when you get the first call on, everything is fine. When you dial the second, it connects, so that you have both calls on the line, but not conferenced. When you conference them in, it drops the calls, and you get a fast busy.
06-22-2009 06:23 AM
ok, u 100% you're using G711????
What you're describing sounds like codec issues.
HTH
java
if this helps, please rate
06-22-2009 07:10 AM
Just now check again in the regions. Its using the default, which is G711. Ive not gotten to the remote sites yet, so I suspect the default would have to be g711. Any other thoughts? Any way I could verify it is g711 besides looking in the regions?
06-22-2009 11:28 AM
Dude, what ever Codec you use you will need transcoding a resources, send me some gateway info:
- "sho inv"
- "sho run"
- "sho diag"
If you have enough DSP's we could add a conference session also...
06-22-2009 11:31 AM
It will also help to put the CallManager Transcoder in the default device pool, so every device regardless of the device-pool will be able to use the resource. You can do the same for conferencing. It is recommended to do proper MRGL and MRG's and assign the MRGL's to the related devices.
06-22-2009 12:04 PM
I havent put any config for transcoding on the gateway. I thought the CUCM would do that automatically, since it was all g711. Should I be doing config on the gateway?>
06-22-2009 12:13 PM
In 6.1 the default codec between regions, unless explicitly specified, is G.729 (also unless you changed the service parameter). Check the Device Pool that the CUCM conference resources belong to and make sure its Region is not using system default to your remote site's Region.
06-22-2009 12:23 PM
Its all on the same main site. No remotes.
06-22-2009 12:29 PM
Gotcha. Do you have a Media Resource Group List with the software CFB resources added to your phones' Device Pool? Are the CFBs registered?
Also make sure the IP Voice Media Streaming App service is activated and running. Try restarting it if the above are in order.
06-22-2009 09:00 PM
Yeah, Ive checked my MRGL, etc. Device pool has it listed as well. They are registered. I have restarted that service, as I saw someone else talk about that, but no success.
06-23-2009 01:52 AM
Dude Where is the gateway:
- "sho inv"
- "sho run"
- "sho diag"
I asked for?
06-23-2009 05:51 AM
If all the usual config looks fine (MRGL, codecs, regions, etc) i would start thinking on looking at a CUCM detailed trace to pinpoint the issue.
You can check the codec by pressing twice the i or ? button that's between the VM, directories, settings buttons.
Do you have any locations configured that could be restricting the BW? You should get an error msg but it doesn't hurt to check that.
HTH
java
if this helps, please rate
06-24-2009 05:32 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide