CCME 7.0 Dial Peers

Unanswered Question
Jun 22nd, 2009

Hello,

I am trying to get a CCME 7.0 install going with outbound calls on a PRI. This is in an area with 10 digit dialing for local calls. RIght now I have this dial peer to handle all calls:

dial-peer voice 3 pots

description PRI Outbound_Local

translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE

destination-pattern 8.T

port 0/0/0:23

It is working for both local and LD but it has to timeout first. How can I get calls to flow out immediatly for both 10 digit local and 11 digit long calls?

Thanks in advance! All replies rated

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Paolo Bevilacqua Mon, 06/22/2009 - 07:52

With proper configuration.

destination-pattern 81[2-9][0-8].[2-9]......

forward-digits 11

And the local DP, assume there is only one area code

destination-pattern 8555[2-9]......

forward-digits 10

Kenneth Mohammed Mon, 06/22/2009 - 07:56

Hello,

Your "T" in your destination pattern instructs the dial peer to wait for the 15 second interdigit timeout before forwarding the digits to the PSTN. To get the call to complete quicker, you may want to use a more explicit destination pattern.

Example

dial-peer voice 3 pots

descrip PRI Outbound_Local

translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE

destination-pattern 8[2-9].........

port 0/0/0:23

forward-digits 10

For LD calls the destination pattern would be

destination-pattern 81[2-9].........

and

forward-digits 11

Hope that helped, if so please rate.

Paolo Bevilacqua Mon, 06/22/2009 - 11:36

No debug needed, the answers above perfectly address the question.

The only thing missing is posts rating.

Actions

This Discussion