06-22-2009 10:30 PM - edited 03-06-2019 06:24 AM
Hi,
Thanks in advance !
I have struck in upgrading IOS image for few switches from TFTP server. All switches are in 10.10.29.X network. Atlast I found that these are blocked to access to server where IOS image is saved(TFTP). I am able to ping any switch to any switch in the network.
My question: Is there any procedure/chance that I can copy the Image file from swith flash to other switch flash. All switches are cisco 2950 switches.
Appreciated your help.
Thanks
Ranga
06-22-2009 11:08 PM
Yes, you can do that. Please follow the details from this link:
http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00800a6744.shtml
HTH,
Sameer
06-23-2009 03:40 AM
Yes just add the following to the 2950 config. Remove when done with the transfer.
tftp-server flash:
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide