DNS Servers for CUCM 6.1

Unanswered Question
Jun 23rd, 2009
User Badges:

The addresses of our Network DNS Servers are changing so I need to change the addresses configured for lookup in CUCM (v6.1.2).


Can someone please remind me whereabouts I need to change these?


It's been so long since they were set I can't remember!!



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Rob Huffman Tue, 06/23/2009 - 05:18
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Lee,


Yes, you can change the entry after installation

by using the following CLI command:


CLI > set network dns


Enter the IP address of the DNS server that

you want to specify as the primary DNS

server. Enter the IP address in dotted

decimal format as ddd.ddd.ddd.ddd.

Consider this field mandatory if DNS is set

to yes (DNS enabled).


http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/6_1_1/install/cmins611-cm.pdf



Hope this helps!

Rob

Actions

This Discussion