06-23-2009 09:41 AM - edited 03-04-2019 05:12 AM
I did not know where this should be posted , may be here will get some answeres
I am trying to set a frame relay lab so I can create the cloud and proceed with my BCSI exam training. I have
2 x 2610 with 2 serial interfaces
1 x 2510 w/ 2 serial interfaces
2 x 2900 XL switches
Please help
Thanks
06-23-2009 09:53 AM
With just 2 routers, the best you can do is back-to-back FR.
This article should be able to help you:
http://www.cisco.com/en/US/tech/tk713/tk237/technologies_configuration_example09186a0080094a3b.shtml
You can look into Dynamips as an alternative option for your studies.
HTH,
__
Edison.
06-23-2009 10:30 AM
that is 3 router 2510 is one of them
06-23-2009 10:41 AM
Your third router can act as the fr switch. This page might also be helpful:
http://www.ciscopress.com/articles/article.asp?p=170741&seqNum=7
http://www.cisco.com/en/US/docs/ios/12_1/wan/configuration/guide/wcdfrely.html#wp1002491
and
http://www.thebryantadvantage.com/Frame%20Relay%20Switch.htm
Good luck,
Jimmy
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: