06-23-2009 03:37 PM - edited 03-11-2019 08:47 AM
I have recently changed some of the routing on my ASA 5540 and I am routing ip address 172.16.0.25 thru a different interface than all of my other traffic.
I can get to this IP from the inside interface and also from the DMZ but I cannot get to it when I'm VPNed in.
Before I made the routing changes, I could get to the IP address just fine. Here's my config:
S 172.16.0.25 255.255.255.255 [1/0] via 192.168.99.2, test
S 172.31.13.0 255.255.255.0 [1/0] via 172.31.0.1, inside
VPN clients get ips in the range of 172.31.13.x
Is there a fix for this?
06-24-2009 01:53 AM
Check the following:-
1) NAT
2) No-nat
3) access-list from lower to higher
07-24-2009 06:26 PM
I talked to Cisco TAC and the only way to get this working is to create a new VPN pool that goes thru the other interface.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide