Solved: Etherchannel on ASA

lukaszkhalil · ‎06-25-2009

Hello

Is there a possibility to aggregate multiple ports into one logical channel on the Cisco ASA ?

Thank your advance

Regards

Lucas

thiland · ‎05-12-2011

This is supported as of 8.4.1.

EtherChannel support (ASA 5510 and higher)

You can configure up to 48 802.3ad EtherChannels of eight active interfaces each.

Note You cannot use interfaces on the 4GE SSM, including the integrated 4GE SSM in slot 1 on the ASA 5550, as part of an EtherChannel.

We introduced the following commands: channel-group, lacp port-priority, interface port-channel, lacp max-bundle, port-channel min-bundle, port-channel load-balance, lacp system-priority, clear lacp counters, show lacp, show port-channel.

http://www.cisco.com/en/US/docs/security/asa/asa84/release/notes/asarn84.html#wp432043

View solution in original post

francisco_1 · ‎06-25-2009

etherchannel is not yet supported on ASA

thiland · ‎05-12-2011