CRC errors

Unanswered Question
Jun 25th, 2009
User Badges:

GigabitEthernet0/1 is up, line protocol is up

Hardware is MV96340 Ethernet, address is 0021.a09c.72c1 (bia 0021.a09c.72c1)

Description: (10/full)

Internet address is XX.XX.XX.XX/30

MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,

reliability 238/255, txload 1/255, rxload 1/255

Encapsulation ARPA, loopback not set

Keepalive set (10 sec)

Full-duplex, 10Mb/s, media type is T

output flow-control is XON, input flow-control is XON

ARP type: ARPA, ARP Timeout 04:00:00

Last input 00:00:00, output 00:00:00, output hang never

Last clearing of "show interface" counters 00:18:07

Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0

Queueing strategy: fifo

Output queue: 0/40 (size/max)

5 minute input rate 69000 bits/sec, 28 packets/sec

5 minute output rate 37000 bits/sec, 23 packets/sec

37670 packets input, 13786943 bytes, 0 no buffer

Received 1076 broadcasts, 660 runts, 0 giants, 0 throttles

4531 input errors, 3871 CRC, 0 frame, 0 overrun, 0 ignored

0 watchdog, 0 multicast, 0 pause input

0 input packets with dribble condition detected

28496 packets output, 8953134 bytes, 0 underruns

0 output errors, 0 collisions, 0 interface resets

0 babbles, 0 late collision, 0 deferred

0 lost carrier, 0 no carrier, 0 pause output

0 output buffer failures, 0 output buffers swapped out



----------

FROM MY OUTPUT ABOVE, I AM HAVING SO MANY PACKECTS IN.....

Received 1076 broadcasts, 660 runts, 0 giants, 0 throttles

4531 input errors, 3871 CRC,

PLEASE WHATS THE CAUSE, WHAT CAN I DO

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
mvsheik123 Thu, 06/25/2009 - 05:47
User Badges:
  • Gold, 750 points or more

Hi,


Try to hard code the switch port and the server/PC connected to the switch port to 1000/Full). If that does not resolve, try changing the cable.


hth

MS


**Rate helpful posts**

Actions

This Discussion