SRST Call Rollover in Fallback Mode

Unanswered Question
Jun 26th, 2009
User Badges:

I'm working on a 3825. I have 2 7960 phones in fallback mode. The main ext is 52720. When I make a call from one phone on ext 52723 to 52720 I pickup. Then when I call on a second line 42723 to 52720 it doesn't rollover to 1st rollover which is 42720. It will just ring on 52720 as a call wait. I can make this happen with the call-forward noan statement in the config, but it needs to be busy, not noan. It also needs to rollover and ring forever and not hangup after a timeout. I've tried all sorts of combinations and could use some guidance. This is what I have for call-manager-fallback:


secondary-dialtone 9

max-conferences 24 gain -6

transfer-system full-consult

ip source-address port 2000

max-ephones 336

max-dn 960 dual-line preference 3

transfer-pattern 5....

default-destination 52720

call-forward busy 4....

moh MOH122304.ULAW.wav

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Kenneth Mohammed Fri, 06/26/2009 - 11:51
User Badges:
  • Silver, 250 points or more


Try removing the dual-line from the max-dn statement, and then call-forward busy to 42720.

Hope that helped, if so please rate.


This Discussion