Prefix 91 on inbound calls

Unanswered Question
Jun 26th, 2009
User Badges:


The objective is to prefix a 81 (we use 8 not 9) for national and 8011 for international calls. I've done this on the gateway side and was wondering if anyone recomends doing this on the call mgr versus the gateway (pros/cons). My config works but the concern is inbound calls will not match dial-peer voice 101 or 102 (answer-address option) and the call will fail. When adding dial-peer 201 using a higher preference and the incoming called-number . all inbound calls match this dial peer because the incoming called-number takes higher precedence over answer-address. Is it possible to have a fail-over dial peer to accept calls that are not matched by dial-peer 101 or 102?


dial-peer voice 101 pots

translation-profile incoming InboundVoice

preference 1

answer-address ..........$

direct-inward-dial

!

dial-peer voice 102 pots

translation-profile incoming IntlInboundVoice

preference 1

answer-address ............$

direct-inward-dial

!

dial-peer voice 103 pots

preference 1

direct-inward-dial

!

dial-peer voice 201 pots

translation-profile incoming InboundVoice

preference 2

answer-address ............$

incoming called-number .

direct-inward-dial


OR


dial-peer voice 201 pots

translation-profile incoming InboundVoice

preference 2

incoming called-number .

direct-inward-dial


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Fri, 06/26/2009 - 17:45
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi,


put the translation on the voice port. There, you can match local calls (strip area code and add 9 only), international, etc and add prexif as needed.

Actions

This Discussion