CUCM 6.0 Installation on HP DL 380 G5

Answered Question
Jun 29th, 2009
User Badges:

Hi All,


I am trying to install CUCM 6.0 on HP DL 380G5 for lab purposes.

Specifications


Intel Xeon Processor @ 2.33 Ghz

2GB RAM DDR2

Physical Hard Drive 1, Controller Slot 1 73.4 Gbytes 10K RPM

Physical Hard Drive 2, Controller Slot 1 73.4 Gbytes 10K RPM

Physical Hard Drive 3, Controller Slot 1 73.4 Gbytes 10K RPM



While Starting installation i am stuck up with an error.



""

Error: not enough physical disks [ 3 disks present]

Error : could not create logical RAID drives



Smart Array P400 in slot 1

Controller Status : OK

Cache Status : OK



physicaldrive 1:1 (box 1:bay 1, 73.4 GB) : OK

physicaldrive 1:2 (box 1:bay 2, 73.4 GB) : OK

physicaldrive 1:3 (box 1:bay 3, 73.4 GB) : OK


Error : the Specified device does not have any logical drive

""


Any ideas ???



Thanks and regards.

Correct Answer by Jaime Valencia about 7 years 11 months ago

You need to either remove or add 1 HDD to make the # of disk an even number to install this.


HTH


java


if this helps, please rate

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Jaime Valencia Mon, 06/29/2009 - 07:07
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

You need to either remove or add 1 HDD to make the # of disk an even number to install this.


HTH


java


if this helps, please rate

Actions

This Discussion