06-29-2009 06:48 AM - edited 03-15-2019 06:44 PM
Hi All,
I am trying to install CUCM 6.0 on HP DL 380G5 for lab purposes.
Specifications
Intel Xeon Processor @ 2.33 Ghz
2GB RAM DDR2
Physical Hard Drive 1, Controller Slot 1 73.4 Gbytes 10K RPM
Physical Hard Drive 2, Controller Slot 1 73.4 Gbytes 10K RPM
Physical Hard Drive 3, Controller Slot 1 73.4 Gbytes 10K RPM
While Starting installation i am stuck up with an error.
""
Error: not enough physical disks [ 3 disks present]
Error : could not create logical RAID drives
Smart Array P400 in slot 1
Controller Status : OK
Cache Status : OK
physicaldrive 1:1 (box 1:bay 1, 73.4 GB) : OK
physicaldrive 1:2 (box 1:bay 2, 73.4 GB) : OK
physicaldrive 1:3 (box 1:bay 3, 73.4 GB) : OK
Error : the Specified device does not have any logical drive
""
Any ideas ???
Thanks and regards.
Solved! Go to Solution.
06-29-2009 07:07 AM
You need to either remove or add 1 HDD to make the # of disk an even number to install this.
HTH
java
if this helps, please rate
06-29-2009 07:07 AM
You need to either remove or add 1 HDD to make the # of disk an even number to install this.
HTH
java
if this helps, please rate
06-29-2009 10:29 PM
Thanks Alot...
After removing one HDD it got working fine.
Cheers...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide