PilotPT or Hunt List

Unanswered Question
Jun 29th, 2009
User Badges:

What is the best practice for deploying Pilot Pt/Hunt Group, or Hunt List / Line Group?

This is in reference to a receptionists phone, with a main number, and multiple lines available to answer that number. thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Jaime Valencia Mon, 06/29/2009 - 07:57
User Badges:
  • Cisco Employee,
  • Hall of Fame,


If you're using AC, then use AC SPECIFIC elements.

If you only want calls to hunt lines of a phone use line groups.

PP/HP are meant to be used with AC, that's why they're under AC config.



if this helps, please rate

balitewiczp Mon, 06/29/2009 - 08:05
User Badges:

Thanks for the quick response. Its exactly what I needed to know. One more question. I've seen this posted before,but cant seem to find it. Is there a way to mask/modify the outbound ANI of these lines? ANI of main number is what I'm after. Its an H323 GW, maybe a xlation pattern based on answer address? I wanted to stay away from burning DID's since these are only rollovers, but it may be cleaner to do it that way. thanks

balitewiczp Mon, 06/29/2009 - 09:02
User Badges:

I changed the mask on the phone to the main number, that worked.

thanks again for your help


This Discussion