SSL VPN Group Policies

J2NoomSai_2 · ‎06-29-2009

Hi

When user login SSL VPN (ASA 8.0), how to apply group policy base on their user name without to choose the gorup option at login page. The problem is when I check the option for user to choose the group at login page, it work fine. But without that group option, it always go to default group policy. Please advise.

Thanks

Sai

Todd Pula · ‎06-30-2009

This is working as designed. If you intend on having multiple connection profiles, you will need to rely on either aliasing with a selection menu or group URLs. If certificate authentication is used, you can use certificate maps to map a user to a particular connection profile based on fields in the cert. Without the above, the ASA has no way of knowing what connection profile to put the user in so it falls back to the default.

J2NoomSai_2 · ‎06-30-2009

Hi Topula

Thanks for the answer. It help a lot. Do you know the link or document for configure group URLs?

Thanks

Todd Pula · ‎07-01-2009

The following doc will give you some sample configs to refer to. At your convenience, please rate this post so that others can refer to the solution.

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808bd83d.shtml

IvanAlvarenga25979 · ‎02-05-2021

Hi guys

Do you have any idea about how I can do it on the Cisco FDM ?