Solved: How to generate the seed file

zheka_pefti · ‎06-29-2009

I've been reading Cisco official guide on CS-MARS and found only a sample of such a file. How could it be done in the first place? Can any one show me a sample of how it looks in the spreadsheet ? I would be more interested in adding agents from CSA and Symantec AV.

Eugene

eegilbert · ‎06-29-2009

I don't, but you can use this document to design one on your own. I would start small, say 5 hosts just to make sure you are getting the schema correct.

Erric

View solution in original post

eegilbert · ‎06-29-2009

Hi Zheka,

Try this:

http://www.cisco.com/en/US/docs/security/security_management/cs-mars/6.0/device/configuration/guide/chDvcOver.html#wp176535

Erric

zheka_pefti · ‎06-29-2009

Thanks, Eric.

This is exactly what I meant. Do you have a sample of a spreadsheet file.

eegilbert · ‎06-29-2009

I don't, but you can use this document to design one on your own. I would start small, say 5 hosts just to make sure you are getting the schema correct.

Erric

patwill66_2 · ‎06-30-2009

This is the format I use when importing servers. I just create a .csv file in notepad to bulk upload my servers. Even if i am just doing a few its easier.

One thing to mention, dont have a carriage return at the end of your file otherwise it will error out.

You can find all the device types listed in the MARS configuration guide.

server1,SNMPCommunityName,,,Windows2003,SNMP,,,,,,,,,,,,,,,10.1.1.101

server2,SNMPCommunityName,,,Windows2003,SNMP,,,,,,,,,,,,,,,10.1.1.102

server3,SNMPCommunityName,,,Windows2003,SNMP,,,,,,,,,,,,,,,10.1.1.103

server4,SNMPCommunityName,,,Windows2003,SNMP,,,,,,,,,,,,,,,10.1.1.104

zheka_pefti · ‎06-30-2009

Thank you all indeed. I made a move ahead with it.