06-30-2009 05:52 AM - edited 07-03-2021 05:46 PM
I'm trying to enable dot1x authentication on wireless client (windows), that connect to my wifi network through an aironet 1240AG.
I've configured Radius server into windows server, configured aironet to use this server for EAP requests, and configured client with a certificate.
But into log I always see error in authentication.
Anyone know if there is a simple guide to follow and for verify my configuration?
Thanks
Daniele
06-30-2009 06:02 AM
You didn't mention if you were trying to use PEAP or EAP-TLS but the config on the AP is pretty much the same regardless.
If you need some help with the Radius configs there are some guides that cover that setup where the wireless controller is used. You could just use the part on setting up the Radius server.
http://www.cisco.com/en/US/partner/products/ps6521/prod_configuration_examples_list.html
06-30-2009 06:26 AM
Thanks.
But this document explains how to authenticate with username/password through ACS database.
Instead, I need to authenticate users directly into Active Directory database (where I've installed a radius server integrated with AD).
Thanks
07-15-2009 10:03 AM
Check out this article.
http://articles.techrepublic.com.com/5100-10878_11-6148579.html
07-15-2009 12:59 PM
Even though it's for a lab, and is outdated (talking about WEP!), I found this to be a great article that starts with the basics.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide