06-30-2009 03:41 PM - edited 03-06-2019 06:31 AM
Hi,
I tried to apply the ip policy route-map command to an interface vlan X, but is not working.
The IOS version is:c3560-advipservicesk9-mz.122-25.SEE4.bin
I searched on Cisco and it looks like PBR is supported in this IOS.
The show ip interface vlan X command shows policy routing is disabled and there is no access-list set.
So, PBR is not working. There are no packet matches against route-maps.
Thanks all.
Solved! Go to Solution.
06-30-2009 03:59 PM
Make sure you have the 'dual-ipv4-and-ipv6 routing' template applied on the switch. The default template is desktop which does not support PBR.
HTH,
__
Edison.
06-30-2009 03:59 PM
Make sure you have the 'dual-ipv4-and-ipv6 routing' template applied on the switch. The default template is desktop which does not support PBR.
HTH,
__
Edison.
06-30-2009 09:40 PM
Hi Edison,
I applied the "desktop routing" template because i no need IPV6 support, and then, PBR works fine.
Thanks for all.
12-17-2020 06:45 AM
Thx you, only switch to dual-ipv4-and-ipv6 routing helps to fix the issue on C3750-X
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide