Device: 10.254.6.250 Status: Partially Successful
*** Device Details for 10.254.6.250 ***
Protocol ==> Unknown / Not Applicable
Selected Protocols with order ==> SSH,Telnet,RCP,TFTP,HTTPS,SCP
CM0062 Polling 10.254.6.250 for changes to configuration.
CM0065 No change in PRIMARY STARTUP config, config fetch not required
CM0065 No change in PRIMARY RUNNING config, config fetch not required
CM00 Polling not supported on VLAN RUNNING config, defaulting to fetch.
CM0151 VLAN RUNNING Config fetch failed for 10.254.6.250 Cause: Couldnot create file in C:\PROGRA~1\CSCOpx\tftpboot directory.TELNET: Failed to establish TELNET connection to 10.254.6.250 - Cause: Authentication failed on device 3 times.
VLAN Config fetch is not supported using RCP.
VLAN Config fetch is not supported using TFTP.
VLAN Config fetch is not supported using SCP.
Action: Check if protocol is supported by device and required device package is installed. Check device credentials. Increase timeout value, if required.
The above is the nessage when i am running Config Mgmt on devices.It is partially collecting Configurations of many devices
,i have checked the device credentials also but alls fine.