07-01-2009 01:51 AM - edited 02-21-2020 03:32 AM
Hi,
We have an ASA5510 set for VPN connections. We have 3 clients that will simultaneously connect to our VPN using one Public IP since they are located in one office. I have observed that only one connection are able to successfully connect. Is there a way to allow multiple connection from a single public IP?
Hope someone will reply. Thanks.
07-01-2009 10:31 AM
You will want to make sure that the ASA is configured to support NAT-T. To enable NAT-T, you will issue the following command: crypto isakmp nat-traversal 10. Please test with this command in place and report back.
07-01-2009 05:07 PM
Hi topula, thanks for the reply. I will test it now then I will give you feedback. Can you please kindly tell me what this command do?
07-02-2009 11:03 PM
Hi topula, your suggestion solved my problem. Thanks for the help. I will rate your help accordingly.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide