07-01-2009 08:00 AM - last edited on 03-25-2019 10:39 PM by ciscomoderator
Why does CCA always show the same information for my CLI postview?
In SDM, it shows the actual CLI commands. Is this possible with CCA?
-Brian
07-01-2009 08:28 AM
In CCA...
System -> Preferences -> Advanced
Can you make sure that Enable CLI postview of IOS voice features is checked?
07-01-2009 08:33 AM
Yes it is.
-Brian
07-01-2009 08:34 AM
CCA 2.0? What are you changing when nothing shows up?
07-01-2009 08:37 AM
Yes CCA 2.0. I've been working on BACD configuration. Does that not have any CLI code to show?
-Brian
07-01-2009 08:46 AM
Brian,
Please unicast Tomoo Esaka at tesaka@cisco.com for CCA 2.0.1. You will not be happy with CCA 2.0 in this regard. CCA 2.0.1 will address all the issues I am afraid you may find, part of which is associated with the version of TCL scripts. You need 3.0.0.2. CCA 2.0.1 will take care of that for you.....
Steve
07-02-2009 09:35 AM
Steve,
Do you have a release date for 2.0.1???
Thanks,
Eivind
07-07-2009 08:35 AM
Posted yesterday!!!!! Hurray!!!!!!!!!!!!!!
07-16-2009 12:32 PM
Hello,
I have installed the latest version of CCA; 2.0.1. However it has still not resolved my issue with the CLI postview. Please advise.
Thanks.
-Brian
07-20-2009 05:55 PM
Brian,
Please verify that the following CLI is on your system:
archive
log config
hidekeys
Let us know if this fixes the problem. Thanks,
Marcos
07-21-2009 04:56 AM
Marcos,
Yes I do have that CLI on my system:
!
archive
log config
hidekeys
!
-Brian
07-21-2009 05:21 AM
I also just reinstalled CCA 2.0.1 and that did not help.
-Brian
07-21-2009 07:00 AM
Is this happening with BACD only? Or all COnfigurations?
Thanks,
Steve
07-21-2009 07:38 AM
This is happening with all configurations.
-Brian
07-21-2009 01:26 PM
Brian, under "archive" can you do "logging enable"?
Thanks,
Marcos
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: