3750 errdisable

Unanswered Question
Jerry Ye Wed, 07/01/2009 - 13:49

Hi Glenda,

You can clear it by shutdown, no shutdown an interface:

interface x/x


no shutdown



Leo Laohoo Wed, 07/01/2009 - 14:35

Hi Glenda,

Jerry's response is the way to enable the port. But I would like to question WHY did the port go into error disable. If you have not yet enabled the port, try the command "sh interface status err" will let users know the cause/reason.

Hope this helps.


This Discussion