Non lldp-med phone vlan support

Unanswered Question
Jul 1st, 2009
User Badges:

All


hoping someone can help here. We have juniper ex switches and cisco call manager 6.1. Most of our phones (259 of them) are 7940/60. I really need help getting these to recognize voice vlan and get dhcp from our voice vlan when they don't support lldp-med.....thanks!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jonathan Schulenberg Mon, 07/06/2009 - 16:39
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

You will need to configure an 802.1q trunk port and allow the voice and data VLANs. The data VLAN should be the native VLAN.


The phone will need to be manually configured with the VLAN ID to tag it's traffic with. This is done through the Settings button; remember '**#' unlocks the running config.


Any other configuration would depend upon the switch port configuration you have.

Actions

This Discussion