How to repeat a hunt list

Unanswered Question
Jul 1st, 2009
User Badges:

Hi guys,I have a hunt pilot with 5 members, how can I repeat the hunting if all members no answer or busy until Maximum Hunt Timer timeout. it seems each member only hunted once by default

My CCM version is 4.1


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (2 ratings)
gogasca Wed, 07/01/2009 - 21:37
User Badges:
  • Green, 3000 points or more

try duplicating the line group with different name same members.

Rob Huffman Thu, 07/02/2009 - 02:00
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Peng,

You can however set up a second Line Group that contains the same DN's/Members and link this second Group in the Hunt List.

Switch the rule on the first Line Group to, Try next Member;then try next Group in Hunt List

This will then cycle through the members a second time (I just tested this out in our lab) :)

Hope this helps!


pengfang Thu, 07/02/2009 - 08:46
User Badges:

Thanks Rob and GONZALO, the duplicated line group's nice to have a option to seltect "repeat" and "repeat times".



This Discussion